-40%

Used 25 "Hot-Shot Livestock Electric Shocker Prod Cattle Pig Wand Rechargeable

$ 37.61

Availability: 100 in stock
  • Brand: techtongda
  • MPN: 154129
  • Condition: The surface of the product is scratched but it can be used normally. Once sold, returns are not accepted. Free accessories can be provided within three months.
  • All returns accepted: ReturnsNotAccepted
  • Type: --
  • Custom Bundle: No

    Description

    Used
    110V Electric Shocker Prod
    Advantage:
    1. The use of electric shock hog,    effortlessly, no bending, no harm pig skin.
    2. Battery diversity of choice (rechargeable battery / battery section    II D).
    3. Switching discharge, more energy security.
    4. With the new design, the use of appropriate stimulation current    physical stimulation of pigs, pig to avoid injury.
    5. Charging time 6 hours of continuous work, more power.
    Instruction
    1. To charge the unit, use the    included Linher electronic charger:
    a. Unscrew the screw and remove the end couver.
    b. Slide the rechargeable battery pack out or leave there.
    c. Plug the charge pin into the pack, then connect the AC power.
    d. The RED charger light is on, indicating that charging is in progress.
    e. Wait 8-10 hours or until the RED charger light turns GREEN.
    f. Replace the pack; replace the end cover and the screw.
    2. If unit is not used for extended  periods of time, remove the battery   pack for storage.
    3. If the unit is dropped in standing water, remove the battery pack,   to  ensure there is on water inside. If water is present, allow battery   to  air-dry for 24 hours. Ensure there is no moisture in the battery   pack or  handle unit before using or storing.
    4. When the prod is not in use, attach the safety clip to the trigger    button to avoid accidental discharge.                 5. Always us a    shaft length that allows you to maintain a safe working distance form    all livestock.
    6. To attach the shaft to handle unit, place shaft onto handle and    tighten white collarnut.
    7. To remove the motor, unscrew the brass nut and remove the end cover,    slide the battery case out and then alide the motor out. If the motor    won’t come out. You should remove the shaft and push the motor out from    the shaft end of the handle. Then you can replace the    motor.
    8. To use the prod, remove the safety   clip from the trigger button and  place the wrist strap around your   wrist. Press the trigger and place the  contact points of the prod on   the rear of the animal. For baest results,  simply press, touch and   release.
    9. Operators are encouraged to minimize use of stock prod.
    10. Use caution when using the Linher prod on wet animals because of    potential increase in intensity.
    Item  Included
    Used 1 Set of Electric  Shocker Prod (154129)